All Consoles


SKU: CM00076

Wired Next Generation Wheel Adaptor



SKU: CM00076 Category:


The DriveHub™ For over a decade racing enthusiast all over the world have been searching for a solution to take their favorite Force Feedback racing wheel from console to console.

The wait is over! The Drive Hub is a revolutionary, industry first cross over gaming adapter making it possible to use virtually any Force Feedback Steering wheel on your Xbox One or PlayStation 4 gaming console. Our proprietary Gearbox technology instantly detects and configures your wheel to match either Xbox One or PlayStation 4, no complicated tuning or PC apps required just Plug and Play. Enjoy true Force Feedback the way the game developers intended, not some make shift solution using controller overlays and a locked center force. As an added bonus the Drive Hub makes all Xbox One and PlayStation 4 Steering wh eels cross compatible.

The Drive Hub opens up a whole new world to those who previously thought their old Wheels were either obsolete or incompatible. No more buying new steering wheels for every system you own or needlessly disposing of old incompatible steering wheels. The Drive Hub fully supports all standard Force feedback protocols including but not limited to Spring Force, Dampers, Collision Force, road, surface and airborne effects.

Fanatec Exclusives

Fanalogic: Use your Favorite Fanatec wheel (including PC wheel bases) with your favorite racing game on the PlayStation 4 or Xbox One , no more having to buy a new wheel or base just play on your favorite platform.

Fanatec Native Mode: This allows Fanatec owners to fully utilize the native Fanatec features, buttons and displays if supported in your favorite Racing game.

Adaptive Force: Enjoy the added benefit of our Adaptive Force technology enhancing your native Xbox One Fanatec wheel (or any wheel) adding the missing environmental effects while playing Forza Motorsport, and Forza Horizon Games.


Package Contents

  • DriveHub
  • 6 ft Micro USB Cable


Compatible Wheels

Logitech G25
Logitech G27
Logitech G29
Logitech Driving Force Pro
Logitech Driving Force GT
Logitech G920
Thrustmaster T80
Thrustmaster Ferrari 458 Spider Racing Wheel
Thrustmaster T150 Force Feedback
Thrustmaster T150 Pro Force Feedback
Thrustmaster T150 Ferrari Wheel Force Feedback
Thrustmaster T300 RS
Thrustmaster TMX Force Feedback
Thrustmaster TMX Pro Force Feedback
Thrustmaster T300 Ferrari GTE
Thrustmaster T500RS
Thrustmaster T-GT
Thrustmaster TS-XW
Thrustmaster TS-PC
Thrustmaster TX (All Versions)
Fanatec Porsche Turbo
Fanatec Porsche Carrera
Fanatec Porsche 911 Turbo S
Fanatec Porsche 911 GT2
Fanatec Porsche 911 GT3
Fanatec Porsche 911 GT3 v2
Fanatec Porsche 911 GT3 RS
Fanatec CSR (+ Pedals)
Fanatec CSR Elite (+ Pedals)
Fanatec ClubSport Wheel Base
Fanatec ClubSport Wheel Base V2
Fanatec ClubSport Wheel Base V2.5
Fanatec CSL
Fanatec CSL Elite PS4
Microsoft Xbox 360 Wireless Racing Wheel ***


Thrustmaster TH8A
Thrustmaster TH8
Thrustmaster TSS
Fanatec SQ 1.5 *

Hand Brakes

Thrustmaster TSS
Fanatec CS handbrake 1.5 *


Fanatec CSL Elite *
Fanatec CSL Elite with Load Cell
Fanatec CS V1
Fanatec CS V2
Fanatec CS V3
Thrustmaster T2PA **
Thrustmaster T3PA **
Thrustmaster T3PA-Pro **
Heusinkveld Sim Pedals
RicmoTech Realgear GTPRO3
G25 Pedals **
G27 Pedals **
G29 Pedals **
G920 Pedals **
CST F1 – 3B Pedals

*ClubSport USB Adapter required

**Thrustmaster DB9 PEDALS T.RJ12 ADAPTER required

***Microsoft Xbox 360 Wireless PC adapter required


This Video shows how to switch between Race Mode and Play Mode on the Drive Hub.


This Video shows how to connect your Drive Hub to the Xbox One console.


This Video shows how to successfully update your Drive Hub device with the latest firmware.


This Video shows how to connect your Drive Hub to the Playstation 4 console.

Drivehub Update Tool

Download the Windows Updater HERE (Please Note: this Updater REQUIRES a Windows PC with Windows 7 or higher.  Your Windows PC MUST have the latest updates installed or the updater will not function correctly. Before using the updater temporarily disable Anti-Virus software. You can turn Anti-Virus back on after usage.)

Download the Mac Updater Beta HERE (Please Note: this Updater REQUIRES a Mac with OS10.15 or higher. You will need to hold down the control key when opening the updater the first time. Please report Mac OSX updater bugs to with the subject heading “OSX Bug”.)

Latest Manual:

Download the Drive Hub manual HERE

Update Release Notes:

22/11/17 – Version 2.0.1 changelog since version 2.0.0

  • Fixed – G29 & Fanatec v2.5 Forza rumble emulation.
  • Added – Forza damper force.
  • Fixed – Game aperture value capture for Fanatec bases on Xbox.
  • Fixed – WRC rumble emulation.
  • Adjusted – Fanatec rumble emulation for Forza games.
  • Added – FFB support for XB1 compatible X360 racing games.
  • Improved – Thrustmaster T500 emaultion for PS3 mode.
  • Fixed – Thrustmaster T80 pedal translation and display.
  • Added – Hori racing wheel.
  • Fixed – Fanatec Porsche shifter.
  • Added – Support for MOMO racing wheels — awaiting user confirmation.
  • Fixed – G27 button to G29 rotary encoder translation for control of MDS in GTS.
  • Fixed – Thrustmaster T300 aperature conversion.
  • Fixed – Guide button for XB1 wheels in direct drive.
  • Added – Rumble emulation canclation on exit to menu in WRC.
  • Fixed – Accessories notificaton set to all for xb1 wheels in direct drive.
  • Added – Support for Frex GP shifter — awaiting user confirmation.
  • Fixed – Thrustmaster TX and TMX L2/R2 and L3/R3 swapped.
  • Fixed – Correct reporting of f/w version for T150 or T300 emulation.
  • Fixed – Setting Clutch array value to 0 for bases with no clutch support.
  • Added – Correct detection of wheel on 360 wireless .
  • Added – Scaling wheel input from fixed aperture wheels.
  • Added – Mapping USB mouse buttons to G29 dial and extra buttons.
  • Added – Support for Thrustmaster TS-PC, TS-XM & T-GT — awaiting user confirmation.
  • Fixed – Blocked setting for pedal rumble passthrough in INIT… ABS menu works again.
  • Fixed – Various wheel and accessory connection messages.
  • Added – Mapped Analog Handbrake input to Cross / A for non-Fanatec bases on PS4.
  • Added – XB1 controller led set to dim in standby.

26/09/17 – Version 2.0.0 changelog since version 2.0.0-rc.14

  • Added – xb1 now correctly enters and exits from sleep mode, wakes correctly using controller guide button.
  • Fixed – G920 reverse.
  • Added – PS3/PC mode, using a DS3 in port 1, drivehub emulates a t500 for TM wheels and G27 for others. For use on PS3 and PC games that dont support newer wheels.
  • Fixed – G920 setting aperture to 900° at connection. Noticed in Project Cars as it doesn’t set the aperture.
  • Fixed – DFGT setting aperture delayed to allow for extended boot time.
  • Fixed – DFGT & DFPRO sequential gears were reversed.
  • Added – host driver for CSR Elite, CSW V1 & V2 USB pedal sets.
  • Fixed – CSW 2.5 rim RPM leds.
  • Fixed – Fanalogic/Fantech mode switching, correct display sent to rim 7 segment display.
  • Added – Start & Left combo to switch mode on PWTS where Start & Back share the same rocker switch and can’t be used together.
  • Fixed – CSL E base RPM leds.
  • Added – mapped PS3/PS4 wheels LT and RT to Gas and Brake to browse menus on Forza and Project Cars.
  • Added – mapped G920 LSB and RSB to PS4 L2 and R2 rather that L3 and R3 – for convenience.
  • Added – FFB support for T500 as a hosted wheel on PS4.
  • Fixed – blocked random bad commands from F1 2017 and Dirt 4, causing CSR to hard lock left.
  • Added – support to stop DS4 BT connection when being used by DriveHub.
  • Fixed – fanatec rumble emulation ot stopping when exiting race.
  • General Bug Fixes.


Wheel Not working on Xbox One
  • Make sure the Xbox One controller is OFF when you connect it to the Drive Hub and when you connect the Drive Hub to the Xbox One.
  • Update the Xbox One controller with the latest firmware.
  • Make sure your micro USB cable is good – most issues are because of a faulty cable.
  • Do a 10 second reboot – Hold the power button on the console for 10 seconds to reboot it, that clears the cache and some things. This is especially helpful if the Drive Hub inadvertently switches to “Play Mode” because it thinks the wheel is a GamePad.
Where are triggers mapped to the wheel for games such as Project Cars?

On a Logitech G27 RT = Gas Pedal and LT=Brake Pedal. It should be the same / similar for other wheels.

Wheel is disconnecting on the PS4 after X minutes

Make sure the DS4 is powered off when connecting to the Drive Hub. Power on by the console’s button only NOT the DS4 controller or Wheel.

Back and Start on the Fanatec Porsche wheels are both on the same rocker switch and can’t be pressed at the same time to switch Drive Hub Modes

Update to the latest firmware. You can now use Start + D-Pad Left to switch emulation modes

Back and Start on the Fanatec CSW v1 wheels are both on the same rocker switch and can’t be pressed at the same time to switch Drive Hub Modes

Update to the latest firmware. You can now use Share + D-Pad Left to switch emulation modes

Logitech G29 not working on Xbox One – Force Feedback, Clutch and shifters not responsive

The G29 must be set to PS4 Mode (in PS3 Mode it emulates a Driving Force GT and that wheel doesn’t have a clutch or shifters.)

Thrustmaster T150/T300 not working on Xbox One

The T300 must be set to PS3/PC Mode a.k.a T500 Mode (this emulates a TX)

Connecting a Thrustmaster TH8A shifter to my T150/T300 doesn’t work on Xbox One

The T150/T300 emulates as a T500 when in PS3/PC Mode (which it must be in when using with Drive Hub). The T500 has no port for a shifter, so when emulating a T500 your T150/T300 shifter port is disabled. So connect the TH8A to the accessory port of the Drive Hub via a USB cable. The Drive Hub will put the T500 + TH8A together.

RPM LED’s are not working on Xbox One

The RPM LED’s are not compatible with the Xbox One. The Drive Hub emulates a Fanalogic Mode as there is no native Fanatec support in GT Sport.

I have a Fanatec CSW 2.5 and it does not have PS3 Mode. What do I do?

You don’t need PS3 Mode for this wheel – simply put it into PC Mode. It is 100% compatible with Drive Hub.

I can’t switch modes with a Fanatec GT2 Wheel

Simply hold D-Pad Left and Start on the wheel for about 4 seconds, the Drive Hub will reboot and flash FFF or LLL.

I read somewhere that the new Fanatec CSW/CSL Firmware 299 for doesn’t work – is that true?

Drive Hub works perfect with CSW V1, CSW V2, CSW V2.5, CSL E XB1, CSL E PS4 on version 299. We recommend that the CSW be in PC mode to use its advanced features.. It is the CronusMAX that you have to downgrade the wheels firmware to a previous version.

I can’t access the PS4 Home or Xbox Guide button when using a Logitech G27, the DS4/Xbox One controller does not function

The PS4 and Xbox One controllers are used for security authorization only so none of the buttons will work in game. However, there are shortcuts to the PS4 Home and XB1 Guide buttons on the gear shifter of the Logitech G27. Simply press L3 and R3 at the same time. For a diagram of the button layouts click on the diagrams below.


Windows 7 Driver Fix

This is a fix for Windows 7 machines. Simply Right Click and run as Administrator from the .bat file and then reboot the Windows PC. Then simply connect the Drive Hub and use the configurator as needed.

Universal Updater


Please enter your contact details and a short message below and we will try to answer your query as soon as possible.

  • This field is for validation purposes and should be left unchanged.
Contact Us

Have a quick sales question? Send us an email and we'll get back to you, asap. Support requests <A href="/support/">should go here</a>.

  • This field is for validation purposes and should be left unchanged.